Alan Playford
New User
Joined: 22 Aug 2012
Posts: 48
Location: UK
|
|
|
|
Hi guys!
Have just cloned my existing zOS v2.2 system to another, changing a lot of dataset names, volumes and contents in the process, to create another "standalone" (e.g. non-Sysplex) LPAR.
I have followed a set of jobs to do this, creating SYSRES and extension volumes, plus obviously JES datasets, spool etc.
However, IPLing this seems to work until it starts the Master Scheduler address space.
At that point, it says it's attempting to dump (not good at any time!) but also can't find the dump datasets (which are SYS1.DUMPxx in the m/catalg and all seemingly defined correctly!)
Anybody else seen this or can offer some means of working out just where in the NIP/IPL processing code it's having a problem?
Log messages follow:
| Code: |
IEA371I SYS1.IPLPARM ON DEVICE 0901 SELECTED FOR IPL PARAMETERS
IEA246I LOAD ID SW SELECTED
IEA246I NUCLST ID SW SELECTED
IEA519I IODF DSN = SYS1.IODF17
IEA520I CONFIGURATION ID = ZOSV22 . IODF DEVICE NUMBER = 0901
IEA091I NUCLEUS 1 SELECTED
IOS128I IPL DEVICE: 00900 VOLUME: Z2SRES
IEA370I MASTER CATALOG SELECTED IS CATALOG.Z2SW.MCAT
IEA009I SYMBOLIC DEFINITIONS WILL BE READ FROM:
IEASYMSW
*IEA247I USING IEASYSSW FOR z/OS 02.02.00 HBB77A0
IEA325I IEASYS00 PARAMETER LIST
CLOCK=00, SELECT CLOCK00
CLPA,
CMB=(UNITR,COMM,GRAPH,CHRDR), ADDITIONAL CMB ENTRIES
CMD=00,
CON=(00,NOJES3), SELECT CONSOL00
COUPLE=00, SELECT COUPLE00
CSA=(5000,50000), CSA RANGE
DIAG=00, SELECT DIAG00, DIAGNOSTIC COMMANDS
DUMP=NO, NO DUMP DATASETS AT IPL
GRS=NONE, NO COORDINATION OF GRS REQUESTS
LICENSE=Z/OS, LICENSE Z/OS
LNKAUTH=LNKLST, AUTHORIZE LNKLST00, APFTAB IS ALTERNATE
LOGCLS=L, WILL NOT BE PRINTED BY DEFAULT
LOGLMT=999999, MAX WTL MESSAGES QUEUED, MUST BE 6 DIGITS
LOGREC=SYS1.CPAC.LOGREC, ERROR RECORDING
LPA=00, SELECT LPALST00
MAXUSER=250, SYS TASKS PLUS INITS PLUS TSOUSERS
MLPA=00, SELECT IEALPA00, MLPA PARAMETERS
MSTRJCL=W0, SELECT MSTJCLEX, MASTER JCL
OMVS=(00,FS), SELECT BPXPRM00 AND BPXPRMFS
OPI=YES, ALLOW OPERATOR OVERRIDE TO IEASYS00
PAGE=(PAGE.Z22A.PLPA,
PAGE.Z22A.COMMON,
PAGE.Z22A.LOCAL1,
PAGE.Z22A.LOCAL2,
PAGE.Z22A.LOCAL3,
PAGE.Z22A.LOCAL4,L),
PLEXCFG=MONOPLEX, MONOPLEX
PROD=00, SELECT IFAPRD00
PROG=00, SELECT PROG00, DYNAMIC APF LIST
REAL=0,
RSU=0, NO RECONFIG STORAGE UNITS
RSVNONR=100, RESERVED ASVT ENTRIES
RSVSTRT=5, RESERVED ASVT ENTRIES
SCH=00, SELECT SCHED00
SMF=00, SELECT SMFPRM00, SMF PARAMETERS
SMS=02, SELECT IGDSMS02
SQA=(15,64), SQA SIZE APPROX 640K
SSN=(00,02), SELECT IEFSSN00 AND IEFSSN02
SVC=00, SELECT IEASVC00, USER SVCS
SYSNAME=CPAC, SYSTEM NAME
VAL=00, SELECT VATLST00
VIODSN=IGNORE.
IEA325I IEASYSSW PARAMETER LIST
CATALOG=SW, USE USER.PARMLIB(IGGCATSW) AP-07MAR
CEE=(SW,L), CEEPRMSW FROM USER.PARMLIB (L/E) AP-07MAR
CMD=SW, COMMNDSW FROM USER.PARMLIB AP-07MAR
CLOCK=SW, SELECT CLOCKSW SET AS NECC. AP-07MAR
COUPLE=SW, COUPLE DATASETS FOR SYSPLEX AP-07MAR
CSA=(3000,400000), CSA RANGE KL-17MAR
DEVSUP=SW, DEVSUP MEMBER FOR DEVICE SUPPORT AP-07MAR
DUMP=DASD, MAKE DUMP DSNS AVAIL AT IPL TIME AP-10MAR
IKJTSO=SW, IKJTSOSW INCLUDE Z/XDC AUTH CMDS AP-07MAR
LOGREC=SYS1.Z2SW.LOGREC, ERROR RECORDING AP-08MAR
LPA=SW, LPALSTSW AP-07MAR
MAXUSER=300, SYS TASKS PLUS INITS AND TSOUSRS AP-31AUG
NSYSLX=512, COPIED FROM 1.13 FOR CICS KL-07MAR
OMVS=(00,FS), SELECT BPXPRM00 (OPTS) FS (FILES)AP-20OCT
OPT=(SW,L), IEAOPTSW SRM PARAMETER O/RIDES AP-07MAR
MSTRJCL=(SW,L), MSTJCLSW FOR MASTER JCL MEMBER AP-07MAR
PAGE=(SYS1.Z2SW.PAGE.PLPA, PAGE DATASETS - PLPA AP-07MAR
SYS1.Z2SW.PAGE.COMMON, PAGE DATASETS - COMMON AP-07MAR
SYS1.Z2SW.PAGE.LOCAL1, PAGE DATASETS - LOCAL1 AP-07MAR
SYS1.Z2SW.PAGE.LOCAL2, PAGE DATASETS - LOCAL2 AP-07MAR
SYS1.Z2SW.PAGE.LOCAL3, PAGE DATASETS - LOCAL3 AP-07MAR
SYS1.Z2SW.PAGE.LOCAL4,L), PAGE DATASETS - LOCAL4 AP-07MAR
PROD=SW, IFAPRDSW LICENCED PRODUCTS AP-07MAR
PROG=SW, PROGSW AP-07MAR
RSVNONR=150, RESERVED ASVT ENTRIES AP-31AUG
RSVSTRT=25, RESERVED ASVT ENTRIES AP-31AUG
SCH=SW, SCHEDSW AP-07MAR
SMF=SW, SMFPRMWO SMF PARMS (CHG TIMEOUT) AP-07MAR
SMS=SW, IGDSMSSW SMS CONFIGURATION AP-07MAR
SQA=(15,200), SQA AND ESQA (PREV 15,160) AP-17OCT
SSN=SW, IEFSSNSW AP-07MAR
SVC=SW, IEASVCSW AP-07MAR
SYSNAME=Z2SW, SYSNAME AP-07MAR
VAL=SW, VATLSTSW VOLUME PROPERTIES AP-07MAR
VIODSN=SYS1.Z2SW.STGINDEX FOR JOURNALLED VIO DSNAMES AP-08MAR
IEA007I STATIC SYSTEM SYMBOL VALUES
&SYSALVL. = "2"
&SYSCLONE. = "SW"
&SYSNAME. = "Z2SW"
&SYSOSLVL. = "Z1020200"
&SYSPLEX. = "LOCAL"
&SYSR1. = "Z2SRES"
&COB4VER. = "420"
&COB5VER. = "520"
&DB2VER. = "11"
&OSFMID. = "HBB77A0"
&OSNAME. = "ZOS"
&OSVER. = "220"
&SYSR2. = "Z2SRE2"
&SYSR3. = "Z2SRE3"
&SYSR4. = "Z2SRE4"
IFB086I LOGREC DATA SET IS SYS1.Z2SW.LOGREC
ISG313I SYSTEM IS INITIALIZING IN GRS NONE MODE. RING OR STAR CONFIGURATION KEYWORDS IN GRSCNF00 ARE IGNORED.
PAGE=(SYS1.Z2SW.PAGE.PLPA, PAGE DATASETS - PLPA AP-07MAR
SYS1.Z2SW.PAGE.COMMON, PAGE DATASETS - COMMON AP-07MAR
SYS1.Z2SW.PAGE.LOCAL1, PAGE DATASETS - LOCAL1 AP-07MAR
SYS1.Z2SW.PAGE.LOCAL2, PAGE DATASETS - LOCAL2 AP-07MAR
SYS1.Z2SW.PAGE.LOCAL3, PAGE DATASETS - LOCAL3 AP-07MAR
SYS1.Z2SW.PAGE.LOCAL4,L), PAGE DATASETS - LOCAL4 AP-07MAR
PROD=SW, IFAPRDSW LICENCED PRODUCTS AP-07MAR
PROG=SW, PROGSW AP-07MAR
RSVNONR=150, RESERVED ASVT ENTRIES AP-31AUG
RSVSTRT=25, RESERVED ASVT ENTRIES AP-31AUG
SCH=SW, SCHEDSW AP-07MAR
SMF=SW, SMFPRMWO SMF PARMS (CHG TIMEOUT) AP-07MAR
SMS=SW, IGDSMSSW SMS CONFIGURATION AP-07MAR
SQA=(15,200), SQA AND ESQA (PREV 15,160) AP-17OCT
SSN=SW, IEFSSNSW AP-07MAR
SVC=SW, IEASVCSW AP-07MAR
SYSNAME=Z2SW, SYSNAME AP-07MAR
VAL=SW, VATLSTSW VOLUME PROPERTIES AP-07MAR
VIODSN=SYS1.Z2SW.STGINDEX FOR JOURNALLED VIO DSNAMES AP-08MAR
IEA007I STATIC SYSTEM SYMBOL VALUES
&SYSALVL. = "2"
&SYSCLONE. = "SW"
&SYSNAME. = "Z2SW"
&SYSOSLVL. = "Z1020200"
&SYSPLEX. = "LOCAL"
&SYSR1. = "Z2SRES"
&COB4VER. = "420"
&COB5VER. = "520"
&DB2VER. = "11"
&OSFMID. = "HBB77A0"
&OSNAME. = "ZOS"
&OSVER. = "220"
&SYSR2. = "Z2SRE2"
&SYSR3. = "Z2SRE3"
&SYSR4. = "Z2SRE4"
IFB086I LOGREC DATA SET IS SYS1.Z2SW.LOGREC
ISG313I SYSTEM IS INITIALIZING IN GRS NONE MODE. RING OR STAR CONFIGURATION KEYWORDS IN GRSCNF00 ARE IGNORED.
IEA940I THE FOLLOWING PAGE DATA SETS ARE IN USE:
PLPA ........... - SYS1.Z2SW.PAGE.PLPA
COMMON ......... - SYS1.Z2SW.PAGE.COMMON
LOCAL .......... - SYS1.Z2SW.PAGE.LOCAL1
LOCAL .......... - SYS1.Z2SW.PAGE.LOCAL2
LOCAL .......... - SYS1.Z2SW.PAGE.LOCAL3
LOCAL .......... - SYS1.Z2SW.PAGE.LOCAL4
IAR040I REAL STORAGE AMOUNTS:
TOTAL AVAILABLE ONLINE: 8G
LFAREA LIMIT FOR xM, xG, OR xT : 4505M
LFAREA LIMIT FOR SUM OF 1M= AND 2G= : 3276M
LFAREA LIMIT FOR 2GB PAGES FOR 2G= : 1
IAR048I LFAREA WAS NOT SPECIFIED WHICH RESULTED IN 0 1MB PAGES AND 0 2GB PAGES.
IAR013I NO STORAGE IS RECONFIGURABLE
IAR031I USE OF STORAGE-CLASS MEMORY FOR PAGING IS ENABLED - PAGESCM=ALL , ONLINE=00000000M
CSV410I APF FORMAT IS NOW DYNAMIC
*ILR005E PLPA PAGE DATA SET FULL, OVERFLOWING TO COMMON DATA SET
ERV=500 0010000
HIPERDISPATCH=YES /* YES ! (NO) USE HYPERDESPATCH */ 0020000
PROJECTCPU=YES /* YES ! (NO) SHOW ZIIP/ZAAP ELIGIBLE */ 0030000
IEA598I TIME ZONE = E.00.00.00
CNZ2600I AUTO-REPLY POLICY ATTEMPTING TO USE AUTOR=00.
CNZ2600I AUTO-REPLY POLICY ACTIVATED.
IXL164I COUPLING THIN INTERRUPTS ENABLED
FOR SYSTEM Z2SW
IXC470I SYSTEM Z2SW EFFECTIVE VALUES: INTERVAL=165 OPNOTIFY=168
DEFAULT USER INTERVAL: 165
DERIVED SPIN INTERVAL: 165
DEFAULT USER OPNOTIFY: + 3
COMPUTED FOR: XCF INITIALIZATION
IXC415I FORCING SYSPLEX CONFIGURATION TO BE MONOPLEX MODE
IXC413I MULTISYSTEM SYSPLEX CONFIGURATION PREVENTED BY PLEXCFG=MONOPLEX
IXC413I XCFLOCAL SYSPLEX CONFIGURATION PREVENTED BY PLEXCFG=MONOPLEX
IXC418I SYSTEM Z2SW IS NOW ACTIVE IN SYSPLEX LOCAL
IXC255I UNABLE TO USE DATA SET
SYS1.Z2S2.WLM.CDS02
AS THE ALTERNATE FOR WLM:
DATA SET NOT FOUND - LOCATE RETURN CODE 08
IXC286I COUPLE DATA SET
SYS1.Z2SW.WLM.CDS01,
VOLSER Z2SRES, HAS BEEN ADDED AS THE PRIMARY
FOR WLM ON SYSTEM Z2SW
IXC286I COUPLE DATA SET
SYS1.Z2SW.LOGR.CDS01,
VOLSER Z2SRES, HAS BEEN ADDED AS THE PRIMARY
FOR LOGR ON SYSTEM Z2SW
IXC286I COUPLE DATA SET
SYS1.Z2SW.LOGR.CDS02,
VOLSER Z2SRE4, HAS BEEN ADDED AS THE ALTERNATE
FOR LOGR ON SYSTEM Z2SW
ISG383I GRS MONITOR SERVER IS AVAILABLE.
IGW040I PDSE Connecting to XCF for IPLID
IGW040I PDSE Connected to XCF for IPLID
IGW040I PDSE IGWLGEDC Connected
IGW040I PDSE Connecting to XCF for Signaling
IGW040I PDSE Connected to XCF for Signaling
IGW040I Buffer Beyond Close not active for SMSPDSE
IGW040I PDSE Posting initialization
IGW043I PDSE MONITOR IS ACTIVE
++ INVOCATION INTERVAL:60 SECONDS
++ SAMPLE DURATION:15 SECONDS
IGW061I SMSPDSE INITIALIZATION COMPLETE.
IGW035I SMSPDSE1 IS NOT ENABLED, SMS=SW
IGW410I SMSVSAM SERVER NOT ACTIVE. RLSINIT(NO) WAS SPECIFIED.
CNZ9013I CONSOLE SERVICES RUNNING IN DISTRIBUTED MODE.
IEA301I CNGRP00 NOT FOUND IN PARMLIB
IEA549I SYSTEM CONSOLE FUNCTIONS AVAILABLE
SYSTEM CONSOLE NAME ASSIGNED HWCI
IEA253I DEVSUP 3480X RECORDING MODE DEFAULT IS COMPACTION.
IEA253I DEVSUP ISO/ANSI TAPE LABEL VERSION DEFAULT IS V3
IEA253I DEVSUP TAPE OUTPUT DEFAULT BLOCK SIZE LIMIT IS 32760
IEA253I DEVSUP COPYSDB DEFAULT IS INPUT
IEA253I DEVSUP STORAGE LIMIT FOR TAPE DDR SWAP DEFAULTED TO 1000M
IEA253I DEVSUP TAPEAUTHDSN: OFF
IEA253I DEVSUP TAPEAUTHF1: OFF
IEA253I DEVSUP TAPEAUTHRC4: OFF
IEA253I DEVSUP TAPEAUTHRC8: OFF
IEA253I DEVSUP PERFORM NORMAL EXPIRATION DATE PROCESSING
IEA301I IEAAPP00 NOT FOUND IN PARMLIB
IEA168I VATLSTSW: VATLST DEFAULT USE ATTRIBUTE OF PRIVATE USED.
IEA168I VATLSTSW: SYSTEM DEFAULT USE ATTRIBUTE OF PRIVATE USED.
CEE3737I CONTENTS OF PARMLIB MEMBER CEEPRMSW
/* See original sample in CEE.SCEESAMP(CEEPRM00) for ALL options. */
/* This is USER.PARMLIB(CEEPRMSW) - Language Environment options */
/* ----------------------------------------------------------------- */
/* Maintenance log: */
/* User Date Reason */
/* ------ ------- -------------------------------------------------- */
/* WINAP 07MAR18 Created initial CEEPRMSW from CEEPRMW0 */
/* ----------------------------------------------------------------- */
/* This customised parmlib member contains any override Winsopia */
/* run-time options that are valid at the system level. The defaults */
/* can be overridden using the options groups CEEDOPT, CEECOPT, and */
/* CELQDOPT. */
/* */
/* Syntax for options: */
/* group_name( option_1, option_2, */
/* option_3, option_4 ) */
/* Where: */
/* group_name is CEEDOPT, CEECOPT or CELQDOPT. */
/* option_x is any option valid at the system level. */
/* */
/* Syntax for keywords: */
/* CEEROPT( value ) - Where value is ALL or COMPAT */
/* CELQROPT( value ) - Where value is ALL or NONE */
/* */
/* Notes: */
/* * Comments and blank lines are allowed for readability. */
/* * Individual options must be separated by a comma or a blank */
/* * There can be more than one option on a line. */
/* * Mixed case is allowed. */
/* * Individual options can be specified as overrideable (OVR) or */
/* nonoverrideable (NONOVR). */
/*********************************************************************/
/*********************************************************************/
/* 31 bit non-CICS option group */
/*********************************************************************/
CEEDOPT(
TERMTHDACT=((UAIMM),OVR)
)
/*********************************************************************/
/* 31 bit CICS option group */
/*********************************************************************/
CEECOPT(
TERMTHDACT=((UAIMM),OVR)
)
/*********************************************************************/
/* 64 bit options group */
/*********************************************************************/
CELQDOPT(
)
/*********************************************************************/
/* Keywords */
/*********************************************************************/
CEEROPT( ALL )
CELQROPT( ALL )
CEE3739I LANGUAGE ENVIRONMENT INITIALIZATION COMPLETE
CUN2046I AN EMPTY UNICODE ENVIRONMENT HAS BEEN ESTABLISHED
CUN2005I CONVERSION ENVIRONMENT SUCCESSFULLY INITIALIZED
IEE112I 02.10.35 PENDING REQUESTS 313
RM=1 IM=0 CEM=0 EM=0 RU=0 IR=0 NOAMRF
ID:R/K T MESSAGE TEXT
01 R *01 IEA793A NO DUMP DATA SETS AVAILABLE FOR DUMPID=001 BY
JOB (*MASTER*). USE THE DUMPDS COMMAND OR REPLY D TO
DELETE THE DUMP |
Thanks in advance, guys! |
|
