DDIO allocation Error

ibmmainframe1 · New User Joined: 26 Jul 2005 Posts: 64 Location: India

Hi All,

When I try to create DDIO using xpediter I am getting the following error. Pls help.

SVM4000I CSWCNSA, RACFSTD.RACFSTD, SYS00287, ATTEMPTING SPACSECA FOR CSWCNSA.CO
BOL.DDIO, SMC004, 1
SVM4855I SET SECONDARY SPACE USING 70% OF PRIMARY ( 2 TRKS) : 1 TRKS
SVM4000I CSWCNSA, RACFSTD.RACFSTD, SYS00287, ATTEMPTING SPACSECR FOR CSWCNSA.CO
BOL.DDIO, SMC004, 123
SVM4001I RECOVERY ATTEMPT FAILED TO PASS FLST/RLST CRITERIA
SVM4000I CSWCNSA, RACFSTD.RACFSTD, SYS00287, ATTEMPTING SPACSECR FOR CSWCNSA.CO
BOL.DDIO, SMC016, 123
SVM4001I RECOVERY ATTEMPT FAILED TO PASS FLST/RLST CRITERIA
SVM4000I CSWCNSA, RACFSTD.RACFSTD, SYS00287, ATTEMPTING SPACSECR FOR CSWCNSA.CO
BOL.DDIO, SMC017, 123
SVM4001I RECOVERY ATTEMPT FAILED TO PASS FLST/RLST CRITERIA
SVM4000I CSWCNSA, RACFSTD.RACFSTD, SYS00287, ATTEMPTING SPACSECR FOR CSWCNSA.CO
BOL.DDIO, SMC012, 123
SVM4001I RECOVERY ATTEMPT FAILED TO PASS FLST/RLST CRITERIA
SVM4000I CSWCNSA, RACFSTD.RACFSTD, SYS00287, ATTEMPTING SPACSECR FOR CSWCNSA.CO
BOL.DDIO, SMC001, 123
SVM4001I RECOVERY ATTEMPT FAILED TO PASS FLST/RLST CRITERIA
IEC028I 837-08,IFG055 ,CSWCNSA,RACFSTD,SYS00287,971E,SMC001,CSWCNSA.COBOL.DDIO
***

dbzTHEdinosauer · Posted: Tue Nov 03, 2009 11:18 pm

the third variable in you input screen is invalid

Robert Sample · Posted: Tue Nov 03, 2009 11:42 pm

How did you define the DDIO? The x37 is usually a space problem but since you have a lot of other things in your post, it's hard to be sure.

ibmmainframe1 · New User Joined: 26 Jul 2005 Posts: 64 Location: India

Pls find the steps that I followed to create a file and let me know if I made any mistake.

I appreciate your help.

expat · Posted: Wed Nov 04, 2009 3:59 pm

1) DO NOT post attachments as not every user is permitted to open them, thus reducing the number of people able to help you.

2) SVM4000I is a message issued by the BMC product StopX37 - so maybe you should look at space allocations

Robert Sample · Posted: Wed Nov 04, 2009 4:21 pm

You need to contact your site support group for assistance. I suspect the space you are attempting to give the DDIO file is not available due to site constraints. Only your site support group can assist you in getting the DDIO file set up correctly.

ibmmainframe1 · New User Joined: 26 Jul 2005 Posts: 64 Location: India

Thank you All. I will check here with system team. Meantime if there is anything else I need to do pls post.

ibmmainframe1 · New User Joined: 26 Jul 2005 Posts: 64 Location: India

I was trying to create the ddio using the utility CWDDSUTL, but the job is failing with S213.

SYSTEM COMPLETION CODE=213 REASON CODE=000000C8
TIME=08.57.29 SEQ=21849 CPU=0000 ASID=00BB
PSW AT TIME OF ERROR 075C1000 80E66226 ILC 2 INTC 0D
NO ACTIVE MODULE FOUND
NAME=UNKNOWN
DATA AT PSW 00E66220 - 41003B92 0A0D41F0 38BE56F0
AR/GR 0: 00CDCAB0/00E66504 1: 00000000/A4213000
2: 00000000/00007CB8 3: 00000000/00E65972
4: 00000000/007B9410 5: 00000000/007B97A4
6: 00000000/007B974C 7: 00000000/007B97A4
8: 00000000/007B976C 9: 00000000/007BACA8
A: 00000000/00E67414 B: 00000000/00E68B1C
C: 00000000/80E68BFC D: 00000000/007B96D0
E: 00000000/80E65AAA F: 00000000/000000C8
END OF SYMPTOM DUMP

using the job:
//UTILITY EXEC PGM=CWDDSUTL,REGION=4M,COND=(8,LT)
//*STEPLIB DD DISP=SHR,DSN=SYS5.XPEDITER.LINKLIB NOT VALID ANYMORE
//ABNLDFIL DD DISP=SHR,DSN=CSWCNSA.XPED.DDIO
//ABNLREPT DD SYSOUT=*
//ABNLTERM DD SYSOUT=*
//ABNLPARM DD *
FORMAT TYPE=SOURCE,GC=8,EXTENTS=460,AD=DUPS,RC=100,BLK=4096
DIRX
/*
//
//* EXTENTS=460 IS MAXIMUM EXTENTS NUMBER, 256 IS ABOUT AVERAGE

dbzTHEdinosauer · Posted: Wed Nov 04, 2009 8:14 pm

ok, responding to your next post.

first, I would try to generate a DDIO with much smaller allocations.

if that does not work, then

I would then get with your support group, as they tailor the jcl to be generated for the creation of DDIO files.

ibmmainframe1 · New User Joined: 26 Jul 2005 Posts: 64 Location: India

Hi Dick,

I use the same however getting the error which I posted at the top. (first post)

dbzTHEdinosauer · Posted: Wed Nov 04, 2009 8:22 pm

ibmmainframe1,
see my previous post, I have edited it and changed my remarks.

Robert Sample · Posted: Wed Nov 04, 2009 8:35 pm

There is definitely something wrong with the way you are building your DDIO. A 213-C8 means

ibmmainframe1 · New User Joined: 26 Jul 2005 Posts: 64 Location: India

Hi Robert,

I created the DDIO file using your JCL, but when I compile with xped 'y' in changeman the job is failing with the following error. pls advise.

PCOPTN028-I COMPUWARE COBOL PROCESSOR - RELEASE 08.06.00 (PTF CXN0139)
PCOPTN027-I COBOL(OUTPUT(NOPRINT, NODDIO))
PCOPTN027-I DDIO(OUTPUT(FIND))
PCOPTN027-I LANGPARM(XREF, MAP)
PCOPTN027-I LANGUAGE(COBOL/370)
PCOPTN027-I PRINT(OUTPUT(LIST, XREF, MAP))
PCOPTN027-I PROCESSOR(OUTPUT(PRINT, DDIO))
PCOPTN027-I AWO, NOC(E), LIB, MAP, BUF(128K), CP(37), DATA(31), OFF, VBREF, X
PCOPTN271-S CWPDDIO IS NOT A SOURCE DDIO FILE OR DATABASE.
PCFLEX095-W
PCFLEX095-W "BUFSIZE" VALUE DECREASED BECAUSE IT EXCEEDED DATA MANAGEMENT MAX
PCFLEX095-W
PCOPTN041-I PROCESSED ON 11/05/2009 AT 05:00:21

dbzTHEdinosauer · Posted: Thu Nov 05, 2009 3:58 pm

ibmmainframe1 · New User Joined: 26 Jul 2005 Posts: 64 Location: India

Hi Dick,

Can I use the same JCL to create the VSAM file using IDCAMS something like that...

dbzTHEdinosauer · Posted: Thu Nov 05, 2009 5:18 pm

again,
go back to the utilities option of the ISPF xpeditor screens,
and use the screen to generate jcl to create a job that creates a vsam ddio file.

Robert Sample · Posted: Thu Nov 05, 2009 5:50 pm

Whether the DDIO is VSAM or sequential, this message

ibmmainframe1 · New User Joined: 26 Jul 2005 Posts: 64 Location: India

Thanks Robert and Dick for your continued support.

ibmmainframe1 · New User Joined: 26 Jul 2005 Posts: 64 Location: India

Hi All,

I have created a shared Directory DDIO file and when i run the job I am getting following error..

Robert Sample · Posted: Fri Nov 06, 2009 9:47 pm

It does not appear your DDIO is defined correctly. See the Compuware manual Enterprise Common Components User/Reference Guide MVS for details on setting up a DBMODEL. It's been quite a while since I've had to set up any of this, so my memory does not recall the exact steps. I think the process was to allocate the DDIO, format it using the utility, and then link it to a database. But it's fuzzy so I could be forgetting a step or two.

If you have not contacted your site support group, I strongly recommend you do so since some of the Compuware definitions depend upon what is already defined at your site.

ibmmainframe1 · New User Joined: 26 Jul 2005 Posts: 64 Location: India

Hi All,

I created DDIO using someone's else in Fileaid.

All these days I was trying to allocate new file or xped to create and that was failing.

Today in Fileaid utilities copy option used to copy someone's into mine and it worked.

Thanks all for your help.

dick scherrer · Posted: Tue Nov 10, 2009 10:32 pm

Good to hear it is working - thank you for the update

d

David Ashlock · New User Joined: 02 Nov 2011 Posts: 2 Location: USA

Our experience with the PCOPTN271-S CWPDDIO IS NOT A SOURCE DDIO FILE OR DATABASE. was due to a security issue and not based on the definition of the file. The user did not have UPDATE CONTROL or ALL and was not allowed to write to dataset.

Gary McDowell · Active User Joined: 15 Oct 2012 Posts: 139 Location: USA

David Ashlock · New User Joined: 02 Nov 2011 Posts: 2 Location: USA

I know, but I just came across this issue for us and that was our issue, same message, different problem.