|
View previous topic :: View next topic
|
| Author |
Message |
mjadwani2785
New User
Joined: 28 Apr 2009
Posts: 89
Location: Noida , Dublin
|
|
|
|
Hi,
In my environment I have bound this DSNREXX plan .. but when i am tryin to invoke a stored procedure ADMIN_INFO_SYSPARM it returns an sqlcode of -805 with error mssg of
DB2V..DSNREXX.1847603F1E2C8829:DSNREXX:03
Manual says concistency token is not valid as I have run this query
SELECT COLLID, NAME, HEX(CONTOKEN), VERSION
FROM DB2V.SYSIBM.SYSPACKAGE
WHERE NAME = 'DSNREXX'
AND HEX(CONTOKEN) = '1847603F1E2C8829';
no rows are returned
.. just wanted to know what should be my next plan of action ? |
|
| Back to top |
|
 |
mjadwani2785
New User
Joined: 28 Apr 2009
Posts: 89
Location: Noida , Dublin
|
|
|
|
Hi,
the above problem solved .. but when the invoking of the code is done it give sqlcode = -471 .
I refreshed the wlm applenv environment. But still the problem persist.
Inputs needed what can be the problem my code as follows:
| Code: |
/*rexx */
/*invoke stored procedure to display zparms */
trace i
DB2_SUBSYS='DB2V'
/*"tsolib activate dataset('BYS1.DSND00A.SDSNLOAD') " */
/* address ispexec
"LIBDEF ISPLLIB DATASET ID('SYS1.DSNDB2V.SDSNLOAD')" */
s_rc = 0
ADDRESS TSO
"SUBCOM DSNREXX"
if rc<>0 then
S_RC = RXSUBCOM('ADD','DSNREXX','DSNREXX')
ADDRESS DSNREXX
"CONNECT" DB2_SUBSYS
If rc <> 0 Then Do
Say 'Cannot connect to ' DB2_subsys ' RC=' rc
Exit(23)
End
SSID = LEFT(' ',4)
SSID_IND = -1
RETCD=0
retcd_ind=0
MSSG=LEFT(' ',1331)
mssg_ind=0
/* MSSG=LEFT(' ',4) */
/* ENC='EBCDIC' ;
ADDRESS DSNREXX
'EXECSQL SET CURRENT PACKAGESET=:ENC '
if (sqlcode<>0) then
call sql_error */
ADDRESS DSNREXX
'EXECSQL CALL SYSPROC.ADMIN_INFO_SYSPARM(:SSID :SSID_IND',
',:RETCD :retcd_ind',
',:MSSG :mssg_ind)' /*:mssg_ind)' */
if (sqlcode<>0) then
call sql_error
ADDRESS DSNREXX
"DISCONNECT"
S_Rc = RXSUBCOM('DELETE','DSNREXX','DSNREXX')
exit
sql_error:
say sqlcode
say sqlstate
SAY SQLERRMC
SAY SQLERRP
Say 'SQLWARN = 'SQLWARN.0',' || SQLWARN.1',' || SQLWARN.2',' ||,
SQLWARN.3',' || SQLWARN.4',' || SQLWARN.5',' ||,
SQLWARN.6',' || SQLWARN.7',' || SQLWARN.8',' ||,
SQLWARN.9',' || SQLWARN.10
Say 'SQLERRD = 'SQLERRD.1',' || SQLERRD.2',' || SQLERRD.3',' ||,
SQLERRD.4',' || SQLERRD.5',' || SQLERRD.6
exit (sqlcode)
|
the code tags... please |
|
| Back to top |
|
|
don.leahy
Active Member
Joined: 06 Jul 2010
Posts: 765
Location: Whitby, ON, Canada
|
|
|
|
| What was the Reason Code? |
|
| Back to top |
|
|
mjadwani2785
New User
Joined: 28 Apr 2009
Posts: 89
Location: Noida , Dublin
|
|
|
|
| sqlcode= -471 |
|
| Back to top |
|
|
dick scherrer
Moderator Emeritus
Joined: 23 Nov 2006
Posts: 19244
Location: Inside the Matrix
|
|
|
|
Hello,
Now, re-read the request and post the reason code. . . |
|
| Back to top |
|
|
mjadwani2785
New User
Joined: 28 Apr 2009
Posts: 89
Location: Noida , Dublin
|
|
|
|
| reason code SYSPROC.ADMIN_INFO_SYSPARM 00E7900C |
|
| Back to top |
|
|
don.leahy
Active Member
Joined: 06 Jul 2010
Posts: 765
Location: Whitby, ON, Canada
|
|
|
|
| What do you see when you look up reason code 00E7900C ? |
|
| Back to top |
|
|
dick scherrer
Moderator Emeritus
Joined: 23 Nov 2006
Posts: 19244
Location: Inside the Matrix
|
|
|
|
Hello,
Read here:
publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/handheld/Connected/BOOKS/dsnmcj10/4.22.60
At the top of the page is a link to "IBM Manuals". Suggest you practice using this to research problems as you will have nearly instant turnaround on this type of queston rather than waiting on someone to see your topic and respond. You probably should either bookmark the Table of Contents for the manuals you use regularly or download them to a local drive so they can be reached even when there is a network/internet outage. |
|
| Back to top |
|
|
mjadwani2785
New User
Joined: 28 Apr 2009
Posts: 89
Location: Noida , Dublin
|
|
|
|
db2vwlm environment is active in wlm.
I refreshed it and resume the wlm but still the problem is dere... what to do? |
|
| Back to top |
|
|
enrico-sorichetti
Superior Member
Joined: 14 Mar 2007
Posts: 10873
Location: italy
|
|
| Back to top |
|
|
mjadwani2785
New User
Joined: 28 Apr 2009
Posts: 89
Location: Noida , Dublin
|
|
|
|
true enricho.. I also trust manuals only i also have doubt on this statement only the one which u quote being a test system here in the company i dont have full authority to check..
Thanks Enrico |
|
| Back to top |
|
|
dick scherrer
Moderator Emeritus
Joined: 23 Nov 2006
Posts: 19244
Location: Inside the Matrix
|
|
|
|
Hello,
| Quote: |
| i dont have full authority to check |
Someone does. . .
If this is important to management they (someone who can check) will be directed to check. |
|
| Back to top |
|
|
enrico-sorichetti
Superior Member
Joined: 14 Mar 2007
Posts: 10873
Location: italy
|
|
|
|
what happened when looking at the manual You found the sentence
| Quote: |
| Use the -ALTER PROCEDURE or -ALTER FUNCTION command to update the WLM ENVIRONMENT to specify an application environment that is defined and active in the active WLM policy, or update the WLM policy to contain a valid application environment name. |
??? |
|
| Back to top |
|
|
mjadwani2785
New User
Joined: 28 Apr 2009
Posts: 89
Location: Noida , Dublin
|
|
|
|
| I queried sysibm.sysroutines this proc is defined to db2vwlm wlm environment and it is active too... |
|
| Back to top |
|
|
mjadwani2785
New User
Joined: 28 Apr 2009
Posts: 89
Location: Noida , Dublin
|
|
|
|
and when I display the proc i even getting this
ADMIN_INFO_SYSPARM
STARTED 0 0 1 0 0 DB2VWLM
DSNX9DIS DISPLAY PROCEDURE REPORT COMPLETE |
|
| Back to top |
|
|
sushanth bobby
Senior Member
Joined: 29 Jul 2008
Posts: 1020
Location: India
|
|
|
|
Hi,
I started with your code and improvised it a bit and on-the-way i encountered all the errors that you have been encountering and little more also. Below is the fully tested code and executed code.
I resolved the -471 with 00E7900C error by looking into the following places for the correct WLM,
* Catalogs
* -DISPLAY PROCEDURE
* SDSF --> PRE DB2D*** --> for me its DB2D, look for WLM, go into the jesjcl--> look for 'APPLENV=' and also let us know what is your NUMTCB value
All WLM Must be same.
After checking all this, still if you have a problem, check whether you are pointing to the right sub-system.
| Code: |
/**** REXX **************************************/
/* DB2 ADMIN_INFO_SYSPARM STORED PROCEDURE */
/************************************************/
ADDRESS TSO "SUBCOM DSNREXX" /* HOST CMD ENV AVAILABLE */
IF RC THEN /* IF NOT, MAKE IT AVAILABLE */
DO /* ADD HOST CMD ENVIRONMENT */
S_RC = RXSUBCOM('ADD','DSNREXX','DSNREXX')
END
/* CONNECT TO DB2 SUB SYSTEM */
ADDRESS DSNREXX 'CONNECT DB2D'
IF SQLCODE <> 0 THEN
DO
CALL SQLCA
SAY RC
END
/*TRACE I */
SSID_IND = -1
SSID = LEFT(' ',4)
SAY SSID
RETCD_IND=0
RETCD=0
MSSG_IND=0
MSSG=LEFT(' ',1331,' ')
INSQLDA.SQLD = 1
INSQLDA.1.SQLTYPE = 449 /* VARCHAR */
INSQLDA.1.SQLLEN = 32000
INSQLDA.1.SQLIND = 0
INSQLDA.1.SQLDATA = ' '
PROC = 'SYSPROC.ADMIN_INFO_SYSPARM1'
ADDRESS DSNREXX 'EXECSQL CALL ' PROC,
'(:SSID :SSID_IND',
',:RETCD :RETCD_IND',
',:MSSG :MSSG_IND)'
SAY 'RETCD ='RETCD
SAY 'LENGTH = 'LENGTH(MSSG)
IF SQLCODE < 0 THEN CALL SQLCA
ELSE
DO
ADDRESS DSNREXX 'EXECSQL DESCRIBE PROCEDURE :PROC INTO :SQLDA'
SAY 'DONE WITH DESCRIBE'
DO I = 1 TO SQLDA.SQLD
SAY "SQLDA."I".SQLD ="SQLDA.SQLD";"
SAY "SQLDA."I".SQLNAME ="SQLDA.I.SQLNAME";"
SAY "SQLDA."I".SQLTYPE ="SQLDA.I.SQLTYPE";"
SAY "SQLDA."I".SQLLOCATOR ="SQLDA.I.SQLLOCATOR";"
SAY "SQLDA."I".SQLESTIMATE="SQLDA.I.SQLESTIMATE";"
END
/****************************************************************/
/* SET UP A CURSOR TO RETRIEVE THE ROWS FROM THE RESULT */
/* SET. */
/****************************************************************/
ADDRESS DSNREXX 'EXECSQL ASSOCIATE LOCATOR (:MSSG)',
'WITH PROCEDURE :PROC'
IF SQLCODE <> 0 THEN CALL SQLCA
SAY 'MSSG ='MSSG
ADDRESS DSNREXX "EXECSQL ALLOCATE C101 CURSOR FOR RESULT SET :MSSG"
IF SQLCODE <> 0 THEN CALL SQLCA
CURSOR = 'C101'
ADDRESS DSNREXX "EXECSQL DESCRIBE CURSOR :CURSOR INTO :SQLDA"
SAY 'ADEBUG SQLCODE ='SQLCODE
IF SQLCODE <> 0 THEN CALL SQLCA
DO I = 1 TO SQLDA.SQLD
SAY "SQLDA."I".SQLD ="SQLDA.SQLD";"
SAY "SQLDA."I".SQLNAME ="SQLDA.I.SQLNAME";"
SAY "SQLDA."I".SQLTYPE ="SQLDA.I.SQLTYPE";"
SAY "SQLDA."I".SQLLEN ="SQLDA.I.SQLLEN";"
SAY "SQLDA."I".SQLLOCATOR ="SQLDA.I.SQLLOCATOR";"
SAY "SQLDA."I".SQLESTIMATE="SQLDA.I.SQLESTIMATE";"
END
/****************************************************************/
/* RETRIEVE AND DISPLAY THE ROWS FROM THE RESULT SET, WHICH */
/* CONTAIN THE COMMAND OUTPUT MESSAGE TEXT. */
/****************************************************************/
I=0
DO UNTIL(SQLCODE <> 0)
ADDRESS DSNREXX 'EXECSQL FETCH C101 ',
'INTO :ROWNUM, :MACRO, :PARAMETER,',
':INSTALL_PANEL :IND_INSTALL_PANEL,',
':INSTALL_FIELD :IND_INSTALL_FIELD,',
':INSTALL_LOCATION :IND_INSTALL_LOCATION,',
':VALUE,',
':ADDITIONAL_INFO :IND_ADDITIONAL_INFO'
IF SQLCODE = 0 THEN
DO
I = I + 1
RECORD.I = SUBSTR(ROWNUM,1,3) SUBSTR(MACRO,1,8)
RECORD.I = RECORD.I SUBSTR(PARAMETER,1,32) SUBSTR(INSTALL_PANEL,1,8)
RECORD.I = RECORD.I SUBSTR(INSTALL_FIELD,1,40) SUBSTR(INSTALL_LOCATION,1,5)
RECORD.I = RECORD.I SUBSTR(STRIP(VALUE),1,40)
RECORD.I = RECORD.I SUBSTR(STRIP(ADDITIONAL_INFO),1,20)
/* SAY 'ROWNUM='ROWNUM
SAY 'MACRO ='MACRO
SAY 'PARAMETER ='PARAMETER
SAY 'INSTALL_PANEL ='INSTALL_PANEL
SAY 'INSTALL_FIELD ='INSTALL_FIELD
SAY 'INSTALL_LOCATION ='INSTALL_LOCATION
SAY 'VALUE ='VALUE
SAY 'ADDITIONAL INFO ='ADDITIONAL_INFO
SAY RECORD.I
*/END
END
RECORD.0=I
IF SQLCODE <> 0 THEN CALL SQLCA
ADDRESS DSNREXX "EXECSQL CLOSE C101"
IF SQLCODE <> 0 THEN CALL SQLCA
ADDRESS DSNREXX "EXECSQL COMMIT"
IF SQLCODE <> 0 THEN CALL SQLCA
SAY RC
END
IF SQLCODE <> 0 THEN
DO
CALL SQLCA
SAY RC
END
ADDRESS DSNREXX 'DISCONNECT'
/* WHEN DONE WITH DSNREXX, REMOVE IT */
S_RC = RXSUBCOM('DELETE','DSNREXX','DSNREXX')
"DELETE '"HXSULL.DB2.DB2D.SYS.PARM"'"
"ALLOC FI(DB2SYSP) DA('HXSULL.DB2.DB2D.SYS.PARM') MOD KEEP REUSE",
"CYL SPACE(1,1) LRECL(200) RECFM(F,B,A) DSORG(PS)"
"EXECIO * DISKW DB2SYSP (STEM RECORD. FINIS"
EXIT
SQLCA:
SAY 'SQLCODE = ' SQLCODE
SAY 'SQLSTATE = ' SQLSTATE
SAY 'SQLERRD.1 = ' SQLERRD.1
SAY 'SQLERRD.2 = ' SQLERRD.2
SAY 'SQLERRD.3 = ' SQLERRD.3
SAY 'SQLERRD.4 = ' SQLERRD.4
SAY 'SQLERRD.5 = ' SQLERRD.5
SAY 'SQLERRD.6 = ' SQLERRD.6
SAY 'SQLERRMC = ' SQLERRMC
RETURN |
I have a doubt, why is the cursor C101 is used, what attribute does it have.
| Code: |
| EXECSQL ALLOCATE C101 CURSOR FOR RESULT SET |
From the redbook i got to know that C1 to C100 are declared with a default attribute of WITH RETURN. What attribute does the cursor C101 have.
Thanks,
Sushanth |
|
| Back to top |
|
|
mjadwani2785
New User
Joined: 28 Apr 2009
Posts: 89
Location: Noida , Dublin
|
|
|
|
Again after so many days...Today I again started working on this one...
The problem is db2vwlm proc is not able to start.. so something strike my mind and I tried to start it manually to look for error...
What I did was /s db2vwlm to look for the error in the log
and the proc started and abended..the error generated is
DSNX967I DSNX9WLM ATTEMPT TO PERFORM WLM FUNCTION IWMCONN FAILED
WITH WLM RC = 0000000C RSN = 11580C1B SSN = DB2V PROC= DB2VWLM
ASID = 0039 WLM_ENV = DB2VWLM
Does this refer to any db2 -wlm racf authority problem ? |
|
| Back to top |
|
|
Robert Sample
Global Moderator
Joined: 06 Jun 2008
Posts: 8696
Location: Dubuque, Iowa, USA
|
|
|
|
| Google is your friend. Googling dsnx967i returned 116 hits, including at leat one with the 0000000C RC and 11580C18 RSN. |
|
| Back to top |
|
|
mjadwani2785
New User
Joined: 28 Apr 2009
Posts: 89
Location: Noida , Dublin
|
|
|
|
The wlm application environment defined at my side was wrong. Today I defined the new one and it worked for me.
Thanks all |
|
| Back to top |
|
|
leela_krsna
New User
Joined: 09 Aug 2006
Posts: 3
|
|
|
|
What's the result of VARY?
"Specify an application environment that is defined and active in the active WLM policy, or update the WLM policy to contain a valid application environment name." |
|
| Back to top |
|
|
mjadwani2785
New User
Joined: 28 Apr 2009
Posts: 89
Location: Noida , Dublin
|
|
|
|
Actual problem was in the wlm application definition the subsystem type was defined as subsystem name instead of just DB2 . Took almost weeks to figure it out but finally got through.
Then from the WLM ISPF panel only activated the policies.
Its a test environment out here just doing my R&D and learning.
Thanks!! |
|
| Back to top |
|
|
|
|
