Portal | Manuals | References | Downloads | Info | Programs | JCLs | Master the Mainframes
IBM Mainframe Computers Forums Index
 
Register
 
IBM Mainframe Computers Forums Index Mainframe: Search IBM Mainframe Forum: FAQ Memberlist Usergroups Profile Log in to check your private messages Log in
 

 

Cond Parameter Error
Goto page 1, 2  Next
 
Post new topic   Reply to topic    IBMMAINFRAMES.com Support Forums -> JCL & VSAM
View previous topic :: :: View next topic  
Author Message
swapnadeep.ganguly

Active User


Joined: 21 Mar 2007
Posts: 203
Location: India

PostPosted: Thu Nov 01, 2007 11:06 am    Post subject: Cond Parameter Error
Reply with quote

Hi All,

I am facing a small error while I was executing my job:
Code:

//STEP01   EXEC PGM=COPYHASP                                           
//*                                                                     
//SYSIN    DD DSN=&NAME..GW01.ONCALL.DATA,DISP=SHR                   
//SYSOUT   DD SYSOUT=*                                                 
//*                                                                     
//**********************************************************************
//*    STEP NAME:   STEP02                                             *
//*    PROGRAM:     IEFBR14                                            *
//*    PURPOSE:     DELETES THE FILES CREATED BY PREVIOUS RUN OF JOB   *
//**********************************************************************
//STEP02   EXEC PGM=IEFBR14                                             
//*                                                                     
//DEDGL    DD DSN=&NAME..DEDGL.DATA,DISP=(MOD,DELETE,DELETE),           
//            SPACE=(TRK,(1,1))                                         
//DEDPROP  DD DSN=&NAME..DEDPROP.DATA,DISP=(MOD,DELETE,DELETE),         
//            SPACE=(TRK,(1,1))                                         
//LIMGL    DD DSN=&NAME..LIMGL.DATA,DISP=(MOD,DELETE,DELETE),           
//            SPACE=(TRK,(1,1))                                         
//*     
//**********************************************************************
//*    STEP NAME:   STEP03                                             *
//*    PROGRAM:     SAS                                                *
//*    PURPOSE:     CALL SAS CODES USING THE PARM P3709W03 TO CREATE   *
//*                 THE DIFFERENT FLAT FILES                           *
//**********************************************************************
//STEP03  EXEC SAS                                                     
//SASLOG   DD SYSOUT=*                                                 
//SASAUTOS DD DSN=CN.PDS.SASMAC,DISP=SHR                               
//         DD DSN=ND.CORP.P0STG2.SAS,DISP=SHR                           
//DEDGL    DD DSN=&NAME..DEDGL.DATA,DISP=(NEW,CATLG,DELETE),           
//            SPACE=(TRK,(1,1))                                         
//DEDPROP  DD DSN=&NAME..DEDPROP.DATA,DISP=(NEW,CATLG,DELETE),         
//            SPACE=(TRK,(1,1))                                         
//LIMGL    DD DSN=&NAME..LIMGL.DATA,DISP=(NEW,CATLG,DELETE),           
//            SPACE=(TRK,(1,1))                                         
//SYSIN    DD DISP=SHR,DSN=XXXX.TEST.SAS(P3709W03)                   
//*                                                 
//**********************************************************************
//*    STEP NAME:   STEP04                                             *
//*    PROGRAM:     ABORT2                                             *
//*    PURPOSE:     ABORT THE JOB IF ANY STEP RETURNS A HICODE         *
//**********************************************************************
//STEP04   EXEC PGM=ABORT2,COND=(0,EQ)                                 
//UCC11NR  DD DUMMY                                                     
//SYSPRINT DD SYSOUT=*                                                 
//SYSOUT   DD SYSOUT=*                                                 
//CEEDUMP  DD SYSOUT=*                                                 
//SYSUDUMP DD SYSOUT=D                                                 
//*                                                                                               


As per the COND parameter in STEP04, the step04 is to get executed if any of the above steps return a code not equal to zero.

But when my step03 returned a code of 8, still my job didn't execute the step.

Can anyone let me know please exactly where was I wrong and why did not the step get executed.
Back to top
View user's profile Send private message

Aaru

Senior Member


Joined: 03 Jul 2007
Posts: 1288
Location: Chennai, India

PostPosted: Thu Nov 01, 2007 11:15 am    Post subject: Reply to: Cond Parameter Error
Reply with quote

what is the return code of the first 2 steps?
Back to top
View user's profile Send private message
swapnadeep.ganguly

Active User


Joined: 21 Mar 2007
Posts: 203
Location: India

PostPosted: Thu Nov 01, 2007 11:16 am    Post subject:
Reply with quote

The Return Code for the first two steps is 0.
Back to top
View user's profile Send private message
swapnadeep.ganguly

Active User


Joined: 21 Mar 2007
Posts: 203
Location: India

PostPosted: Thu Nov 01, 2007 11:28 am    Post subject:
Reply with quote

One more problem that is arising is:

My Job is calling the PROC which consists of the above steps. So, when I am mentioning COND=(0,EQ,STEP03), then the job is displaying a JCL-Error and showing the message STEP03 not found in job.

Why is this issue arising?
Back to top
View user's profile Send private message
vasanthkumarhb

Active User


Joined: 06 Sep 2007
Posts: 276
Location: Bang,iflex

PostPosted: Thu Nov 01, 2007 11:52 am    Post subject:
Reply with quote

Hi,



Check out the letters or symbols used in the step01o2 or 03, some time it happens, or other wise write the same or copy the same in new dataset it will work according to your expectation.


Regard's
Vasanth........ icon_smile.gif
Back to top
View user's profile Send private message
Aaru

Senior Member


Joined: 03 Jul 2007
Posts: 1288
Location: Chennai, India

PostPosted: Thu Nov 01, 2007 12:13 pm    Post subject: Reply to: Cond Parameter Error
Reply with quote

swapnadeep,

Quote:
The Return Code for the first two steps is 0.


You have not coded the stepname in the 4th step COND parameter.When you do not code a stepname, step4 will execute only when the return codes of all previous steps do not satisfy the test specified by COND.

Here as the return code of the first 2 steps are zeroes, the condition is satisfied and hence this is bypassed.
Back to top
View user's profile Send private message
swapnadeep.ganguly

Active User


Joined: 21 Mar 2007
Posts: 203
Location: India

PostPosted: Thu Nov 01, 2007 12:18 pm    Post subject:
Reply with quote

Aaru,

I am not able to specify the stepname in the COND parameter. I am getting a JCL error which is stating :"STEP03 NOT FOUND IN JOB".
Back to top
View user's profile Send private message
swapnadeep.ganguly

Active User


Joined: 21 Mar 2007
Posts: 203
Location: India

PostPosted: Thu Nov 01, 2007 12:32 pm    Post subject:
Reply with quote

Vasanth,

I tried your suggestion too...

But it still did not work for me....
Back to top
View user's profile Send private message
jmreddymca
Warnings : 1

New User


Joined: 14 Oct 2007
Posts: 29
Location: Bangalore

PostPosted: Thu Nov 01, 2007 12:37 pm    Post subject: Reply to: Cond Parameter Error
Reply with quote

please include the previous step name in the last cond and chek it
Back to top
View user's profile Send private message
vasanthkumarhb

Active User


Joined: 06 Sep 2007
Posts: 276
Location: Bang,iflex

PostPosted: Thu Nov 01, 2007 12:46 pm    Post subject:
Reply with quote

Hi Swapnadeep,



//STEP04 EXEC PGM=ABORT2,COND=(0,EQ)



give the stepname after the EQ parameter, if it says step name not available change the step name save it and submitt it, or other wise pls send us joblog statements.


Regard's
Vasanth...... icon_smile.gif
Back to top
View user's profile Send private message
swapnadeep.ganguly

Active User


Joined: 21 Mar 2007
Posts: 203
Location: India

PostPosted: Thu Nov 01, 2007 1:47 pm    Post subject:
Reply with quote

Hi,

I tried your suggestion but to no avail.

The joblog is as under:
Code:

                       J E S 2  J O B  L O G  --  S Y S T E M  1 1 5 1  --  N O
                                                                               
04.15.23 J0022362 ---- THURSDAY,  01 NOV 2007 ----                             
04.15.23 J0022362  IRR010I  USERID XXXXXX   IS ASSIGNED TO THIS JOB.           
04.15.23 J0022362  JESX6014 SCHENV=TDH1                  K=82         XXXXXX 
04.15.34 J0022362  IEF452I XXXXXX  - JOB NOT RUN - JCL ERROR                 
04.15.34 J0022362  $HASP396 XXXXXX  TERMINATED                               
------ JES2 JOB STATISTICS ------                                             
  01 NOV 2007 JOB EXECUTION DATE                                               
           12 CARDS READ                                                       
          180 SYSOUT PRINT RECORDS                                             
            0 SYSOUT PUNCH RECORDS                                             
           12 SYSOUT SPOOL KBYTES                                             
         0.00 MINUTES EXECUTION TIME
                                         
Back to top
View user's profile Send private message
swapnadeep.ganguly

Active User


Joined: 21 Mar 2007
Posts: 203
Location: India

PostPosted: Thu Nov 01, 2007 1:49 pm    Post subject:
Reply with quote

The message that we are getting as under:
Code:

STMT NO. MESSAGE                                                               
       3 IEFC001I PROCEDURE K3709W03 WAS EXPANDED USING PRIVATE LIBRARY XXXXXX.
      12 IEFC001I PROCEDURE SAS WAS EXPANDED USING SYSTEM LIBRARY SYS1.PROCLIB
      39 IEF645I INVALID REFERBACK IN THE COND FIELD                           
Back to top
View user's profile Send private message
murmohk1

Senior Member


Joined: 29 Jun 2006
Posts: 1439
Location: Bangalore,India

PostPosted: Thu Nov 01, 2007 1:53 pm    Post subject:
Reply with quote

Swapnadeep,

JESJCL please. We cannot see whats there in your job.
Back to top
View user's profile Send private message
swapnadeep.ganguly

Active User


Joined: 21 Mar 2007
Posts: 203
Location: India

PostPosted: Thu Nov 01, 2007 2:02 pm    Post subject:
Reply with quote

The JESJCL is as under:
Code:

//XXXXXX  JOB (8200,2395),'SWAPNADEEP XXXXXX',                       
//      MSGCLASS=J,NOTIFY=XXXXXX,CLASS=J,MSGLEVEL=1,SCHENV=TDH1       
/*ROUTE PRINT N11R10                                                 
//********************************************************************
//*                         || JOB NARRATIVE ||                       
//*                         -------------------                       
//*     THE JOB CALLS THE PROC K3709W03 TO INVOKE THE SAS CODES       
//*                   LINKING THE JCL WITH THE SAS CODE               
//*                                                                   
//********************************************************************
//PROCLIB  JCLLIB ORDER=(XXXXXX.TEST.SAS)                             
//K3709    EXEC PROC=K3709W03                                         
XXK3709W03 PROC NAME=XXXXXX.GW03.SAS                               
XX********************************************************************
XX*                      || PROC NARRATIVE ||                         
XX*                      --------------------                         
XX*                                                                   
XX*     THE PROC K3709W03 IS RESPONSIBLE TO LINK THE JCL BY CALLING   
XX*             THE PARM P3709W03 WHICH CONTAINS THE SAS CODES.       
XX*                                                                   
XX*    OUTPUT(S) FROM THIS JOB:                                       
XX*                                                                   
XX*     FLAT FILE(S):                                                 
XX*       DEDGL             :T3709BTX.GW03.SAS.DEDGL.DATA             
XX*       DEDPROP           :T3709BTX.GW03.SAS.DEDPROP.DATA           
XX*       LIMGL             :T3709BTX.GW03.SAS.LIMGL.DATA             
XX*                                                                   
XX*                      * * * * * * * * * * *                       
XX*                                                                   
XX*   STEP      PROGRAM      DESCRIPTION                             
XX*   ----      -------      -----------                             
XX*  STEP01    COPYHASP     ON-CALL LIST IF JOB ABENDS               
XX*  STEP02    IEFBR14      DELETES FLAT FILES CREATED BY PREVIOUS RUN
XX*  STEPSAS   SAS          CALL SAS CODES TO CREATE THE DATASETS     
XX*  STEP04    ABORT2       ABORT JOB IF ABOVE STEP RETURNS A HICODE 
XX*                                                                   
XX********************************************************************
XX********************************************************************
XX*    STEP NAME:   STEP01                                           
XX*    PROGRAM:     COPYHASP                                         
XX*    PURPOSE:     CALLS THE ON-CALL DATASET IF THE PROGRAM RETURNS A
XX*                 HIGH VALUE. DEPENDING UPON THE VALUE RETURNED,   
XX*                 DIFFERENT ERROR FILE IS DISPLAYED IN SPOOL.       
XX********************************************************************
XX********************************************************************
XX*                   ========================                       
XX*                   |  C A L L    L I S T  |                       
XX*                   ========================                       
XX********************************************************************
XXSTEP01   EXEC PGM=COPYHASP                                         
XX*                                                                   
XXSYSIN    DD DSN=T3709BTX.GW01.ONCALL.DATA,DISP=SHR                 
XXSYSOUT   DD SYSOUT=*                                               
XX*                                                                   
XX********************************************************************
XX*    STEP NAME:   STEP02                                           
XX*    PROGRAM:     IEFBR14                                           
XX*    PURPOSE:     DELETES THE FILES CREATED BY PREVIOUS RUN OF JOB 
XX********************************************************************
XXSTEP02   EXEC PGM=IEFBR14                                           
XX*                                                                   
XXDEDGL    DD DSN=&NAME..DEDGL.DATA,DISP=(MOD,DELETE,DELETE),         
XX            SPACE=(TRK,(1,1))                                       
IEFC653I SUBSTITUTION JCL - DSN=T3709BTX.GW03.SAS.DEDGL.DATA,DISP=(MOD
XXDEDPROP  DD DSN=&NAME..DEDPROP.DATA,DISP=(MOD,DELETE,DELETE),       
XX            SPACE=(TRK,(1,1))                                       
IEFC653I SUBSTITUTION JCL - DSN=T3709BTX.GW03.SAS.DEDPROP.DATA,DISP=(M
XXLIMGL    DD DSN=&NAME..LIMGL.DATA,DISP=(MOD,DELETE,DELETE),         
XX            SPACE=(TRK,(1,1))                                       
XX*                                                                   
XX********************************************************************
XX*    STEP NAME:   STEPSAS                                           
XX*    PROGRAM:     SAS                                               
XX*    PURPOSE:     CALL SAS CODES USING THE PARM P3709W03 TO CREATE 
XX*                 THE DIFFERENT FLAT FILES                         
XX********************************************************************
   IEFC653I SUBSTITUTION JCL - DSN=T3709BTX.GW03.SAS.LIMGL.DATA,DISP=(MOD,DELETE,DELETE)
12 XXSTEPSAS  EXEC SAS                                                   
13 XXSAS     PROC ENTRY=SASB,                                           
   XX             CONFIG=NULLFILE,                                       
   XX             LOAD='SYSPSAS.NULLPDS',                               
   XX             LOAD2='SYSPSAS.NULLPDS',                               
   XX             LOAD3='SYSPSAS.NULLPDS',                               
   XX             SASAUTO='SYSPSAS.NULLCOPY',                           
   XX             OPTIONS=,                                             
   XX             SORT=4,                                               
   XX             WORK='200,200',WORKCNT=5                               
   XX*                                                                   
   XX* CREATED A PERMANENT NULLPDS TO RESOLVE A CA-11 RESTART ISSUE.     
   XX* B. NEILD 03/09/2006                                               
   XX*                                                                   
   XX* ADDED LOAD2 AND LOAD3 SYMBOLICS.                                 
   XX* B. NEILD 12/21/2006                                               
   XX*                                                                   
   XX* UPDATED WORK ALLOCATION.                                         
   XX* B. NEILD 2/27/2007                                               
   XX*                                                                   
   XX********************************************************************
14 XXSAS      EXEC PGM=&ENTRY,PARM='SORT=&SORT &OPTIONS',REGION=4096K   
   IEFC653I SUBSTITUTION JCL - PGM=SASB,PARM='SORT=4 ',REGION=4096K
XXSTEPLIB  DD DISP=SHR,DSN=&LOAD                                   
IEFC653I SUBSTITUTION JCL - DISP=SHR,DSN=SYSPSAS.NULLPDS           
XX         DD DISP=SHR,DSN=&LOAD2                                   
IEFC653I SUBSTITUTION JCL - DISP=SHR,DSN=SYSPSAS.NULLPDS           
XX         DD DISP=SHR,DSN=&LOAD3                                   
IEFC653I SUBSTITUTION JCL - DISP=SHR,DSN=SYSPSAS.NULLPDS           
XX         DD DISP=SHR,DSN=SYSPSAS.LIBRARY                         
XX         DD DISP=SHR,DSN=SYSPSAS.SASC.TRANSLIB                   
XX**                                                               
XX**  UNCOMMENT/SUPPLY YOUR DSN IF YOU NEED TO CONCATENATE SORT LIB
XX**       DD DISP=SHR,DSN=SYS1.SORT.LINKLIB                       
XX**                                                               
XX* REQUIRED FOR EMAIL                                             
XXSYSTCPD  DD DISP=SHR,DSN=SYS1.TCPPARMS(TCPDATB)                   
XXCONFIG   DD DISP=SHR,DSN=SYSTSAS.CNTL(BATW0)                     
XX         DD DISP=SHR,DSN=&CONFIG                                 
IEFC653I SUBSTITUTION JCL - DISP=SHR,DSN=NULLFILE                   
XXSASAUTOS DD DSN=CN.PDS.SASMAC,DISP=SHR                           
X/SASAUTOS DD DISP=SHR,DSN=&SASAUTO                                 
IEFC653I SUBSTITUTION JCL - DISP=SHR,DSN=SYSPSAS.NULLCOPY           
24 XX         DD DSN=ND.CORP.P0STG2.SAS,DISP=SHR                               
   X/         DD DISP=SHR,DSN=SYSPSAS.AUTOLIB                                   
25 XX         DD DISP=SHR,DSN=SYSPSAS.SPC.LOCAL.AUTOLIB                         
26 XXSASHELP  DD DISP=SHR,DSN=SYSPSAS.SASHELP                                   
27 XXSASMSG   DD DISP=SHR,DSN=SYSPSAS.SASMSG                                   
28 XXTKMVSENV DD DISP=SHR,DSN=SYSPSAS.TKMVSENV(TKMVSENV)                       
29 XXWORK     DD SPACE=(CYL,(&WORK),,,ROUND),UNIT=(,&WORKCNT),                 
   XX            DCB=(RECFM=FS,DSORG=PS)                                       
   IEFC653I SUBSTITUTION JCL - SPACE=(CYL,(200,200),,,ROUND),UNIT=(,5),DCB=(RECFM=FS,DSORG=PS)
30 XXSASLOG   DD SYSOUT=*                                                       
   X/SASLOG   DD SYSOUT=*                                                       
31 XXSASCLOG  DD SYSOUT=*                                                       
32 XXSASLIST  DD SYSOUT=*                                                       
33 XXSASPARM  DD UNIT=SYSDA,SPACE=(400,(100,300)),                             
   XX             DCB=(RECFM=FB,LRECL=80,BLKSIZE=400,BUFNO=1)                   
34 XXSYSUDUMP DD SYSOUT=*                                                       
   XX**  ADD A LINE LIKE THE FOLLOWING TO CREATE A MACHINE-READABLE DUMP       
   XX*SYSMDUMP DD DSN=DUMP,UNIT=SYSDA,DISP=(NEW,CATLG),SPACE=(TRK,(20,5))       
   XX* END   
35 XXDEDGL    DD DSN=&NAME..DEDGL.DATA,DISP=(NEW,CATLG,DELETE),                 
   XX            SPACE=(TRK,(1,1))                                             
   IEFC653I SUBSTITUTION JCL - DSN=T3709BTX.GW03.SAS.DEDGL.DATA,DISP=(NEW,CATLG,
36 XXDEDPROP  DD DSN=&NAME..DEDPROP.DATA,DISP=(NEW,CATLG,DELETE),               
   XX            SPACE=(TRK,(1,1))                                             
   IEFC653I SUBSTITUTION JCL - DSN=T3709BTX.GW03.SAS.DEDPROP.DATA,DISP=(NEW,CATL
37 XXLIMGL    DD DSN=&NAME..LIMGL.DATA,DISP=(NEW,CATLG,DELETE),                 
   XX            SPACE=(TRK,(1,1))                                             
   IEFC653I SUBSTITUTION JCL - DSN=T3709BTX.GW03.SAS.LIMGL.DATA,DISP=(NEW,CATLG,
38 XXSYSIN    DD DISP=SHR,DSN=N48FF9.TEST.SAS(P3709W03)                         
   XX*                                                                         
   XX**********************************************************************01450
   XX*    STEP NAME:   STEP04                                             *01460
   XX*    PROGRAM:     ABORT2                                             *01470
   XX*    PURPOSE:     ABORT THE JOB IF ANY STEP RETURNS A HICODE         *01480
   XX**********************************************************************01500
39 XXSTEP04   EXEC PGM=ABORT2,COND=(0,EQ,STEPSAS)                               
40 XXUCC11NR  DD DUMMY                                                         
41 XXSYSPRINT DD SYSOUT=*                                                       
42 XXSYSOUT   DD SYSOUT=*                                                       
43 XXCEEDUMP  DD SYSOUT=*
44 XXSYSUDUMP DD SYSOUT=D
   XX*                   
                                                                 
Back to top
View user's profile Send private message
hemanth.nandas

Active User


Joined: 18 Aug 2007
Posts: 120
Location: Chennai

PostPosted: Thu Nov 01, 2007 2:14 pm    Post subject:
Reply with quote

Hi Swarandeep,

Its not Job step, So Include your job step name.

Like this,

Code:
//STEP04 EXEC PGM=ABORT2,COND=(0,EQ,K3709.STEPSAS)
Back to top
View user's profile Send private message
swapnadeep.ganguly

Active User


Joined: 21 Mar 2007
Posts: 203
Location: India

PostPosted: Thu Nov 01, 2007 2:19 pm    Post subject:
Reply with quote

Sorry Hemanth,

Still getting the same message: "STEP "K3709W03.STEPSAS " NOT FOUND IN JOB"
Back to top
View user's profile Send private message
hemanth.nandas

Active User


Joined: 18 Aug 2007
Posts: 120
Location: Chennai

PostPosted: Thu Nov 01, 2007 2:28 pm    Post subject: Reply to: Cond Parameter Error
Reply with quote

Hi SWapnadeep,

Quote:
//PROCLIB JCLLIB ORDER=(XXXXXX.TEST.SAS)
//K3709 EXEC PROC=K3709W03
XXK3709W03 PROC NAME=XXXXXX.GW03.SAS
XX********************************************************************


I told you to use Job Step name, not Proc step name.
Again you have used proc name only.
Use like this,

Quote:
//STEP04 EXEC PGM=ABORT,COND=(0,EQ,K3709)

OR

//STEP04 EXEC PGM=ABORT,COND=(0,EQ,K3709.STEPSAS)
Back to top
View user's profile Send private message
swapnadeep.ganguly

Active User


Joined: 21 Mar 2007
Posts: 203
Location: India

PostPosted: Thu Nov 01, 2007 2:38 pm    Post subject:
Reply with quote

No hemanth.

I am still getting the same message
Back to top
View user's profile Send private message
enrico-sorichetti

Global Moderator


Joined: 14 Mar 2007
Posts: 10203
Location: italy

PostPosted: Thu Nov 01, 2007 2:44 pm    Post subject: Reply to: Cond Parameter Error
Reply with quote

To all of You ...

what about reading the JCL reference on how to use the
"COND" with nested procs ???
Back to top
View user's profile Send private message
hemanth.nandas

Active User


Joined: 18 Aug 2007
Posts: 120
Location: Chennai

PostPosted: Thu Nov 01, 2007 3:02 pm    Post subject:
Reply with quote

Hi Swapnadeep,

Try with following code and let me know.

Code:
//STEP04 EXEC PGM=ABORT,COND.STEPSAS=(0,EQ,K3709)

or

//STEP04 EXEC PGM=ABORT,COND.STEPSAS=(0,EQ)
Back to top
View user's profile Send private message
View previous topic :: :: View next topic  
Post new topic   Reply to topic    IBMMAINFRAMES.com Support Forums -> JCL & VSAM All times are GMT + 6 Hours
Goto page 1, 2  Next
Page 1 of 2

 

Search our Forum:

Similar Topics
Topic Author Forum Replies Posted
No new posts S922 Error yuvan ABENDS & Debugging 3 Fri Dec 02, 2016 6:58 pm
No new posts Invoke Webservice Fails with DFHPI100... divated CICS 2 Thu Nov 24, 2016 5:57 pm
No new posts TOT & DATE parameter in ICEMAN hemanthj642 DFSORT/ICETOOL 4 Mon Nov 14, 2016 5:19 am
No new posts Error during restore rename archanamuthukrishnan All Other Mainframe Topics 2 Fri Oct 14, 2016 3:30 pm
No new posts Error IEC161I 052(009,XXXRS00)-084 wh... amitc23 JCL & VSAM 10 Wed Oct 12, 2016 5:00 pm


Facebook
Back to Top
 
Mainframe Wiki | Forum Rules | Bookmarks | Subscriptions | FAQ | Tutorials | Contact Us